Split System Heat Pumps
Products
 
 
Models
GHGD

Capacities
1.5 to 5 Ton

Efficiency
13 SEER

Warranty
Compressor - 5 Year Limited
Other parts - 1-5 Year/3-1 Year

 
Guardian R-410A Heat Pump Condensing Unit

The heat pump condensing unit is the outdoor part of a versatile system of heating and air conditioning. It is designed to be custom-matched with one of UPGs complete line of evaporator sections, with each serving a specific function. Matching Air Handlers are available for upflow, downflow, or horizontal applications to provide a complete system. Electric Heaters are available, if required. Add-on coils are available for use with upflow, downflow, or horizontal furnaces and air handlers.


Special Benefits
  • QUALITY CONDENSER COILS - The coil is constructed of copper tubing and enhanced aluminum fins for increased efficiency and corrosion protection.
  • PROTECTED COMPRESSOR - The compressor is internally protected against high pressure, temperature, and externally by a factory installed high pressure switch. This is accomplished by the simultaneous operation of high pressure relief valve and a temperature sensor which protects the compressor if undesirable operating conditions occur. A liquid line filter-drier further protects the compressor.
  • DURABLE FINISH - The cabinet is made of pre-painted steel. The pre-treated galvanized steel provides a better paint to steel bond, which resists corrosion and rust creep. Special primer formulas and matted-textured finish insure less fading when exposed to sunlight.
  • LOWER INSTALLED COST - Installation time and costs are reduced by easy power and control wiring connections. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof.
  • TOP DISCHARGE - The warm air from the top mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications.
  • LOW OPERATING SOUND LEVEL - The upward air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds.
  • LOW MAINTENANCE - Long life permanently lubricated motor-bearings need no annual servicing.
  • EASY SERVICE ACCESS - Fully exposed refrigerant connections, and a single panel covering the electrical controls make for easy servicing of the unit.
  • SECURED SERVICE VALVES - Secured re-usable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
  • U.L. and C.U.L. listed - approved for outdoor application.
  • Agency Listed - U.L. and C.U.L. listed - approved for outdoor application. The unit is certified in accordance with the Unitary Small Equipment certification program, which is based on ARI Standard 210/240.

Publications and Manuals
DescriptionPart NumberFile Size
Tech Guides
Technical Guide - GHGD18 thru 60 R-410A Split-System Heat Pumps (13 SEER) 556732-UTG-A-0210392 KB
Technical Guide - GHGD30 thru 60 3 R-410A Split-System Heat Pumps (13 SEER) 505439-UTG-C-0909346 KB
 
Tabular Data
Tabular Data Sheet - GHGD18* thru 60 1 R-410A Split-System Heat Pumps (13 SEER) 511442-UTD-B-070995 KB
Tabular Data Sheet - GHGD18* thru 60 Split System Heat Pumps (13 SEER) 544849-UTD-A-031094 KB
Tabular Data Sheet - GHGD30 thru 60* 3 R-410A Split-System Heat Pumps (13 SEER) 523341-UTD-B-090994 KB
 
Accessory Installation Instructions
Installation Accessory - 1HK0201 Hurricane Kit 035-21331-001-B-0709132 KB
Installation Accessory - 2FD06700224 Blower-Off Delay Kit 417779-UAI-B-120830 KB
Installation Accessory - 2SA067* Hard Start Kit 364024-UAI-B-0509978 KB
 
Submittal Drawings
Submittal Data Sheet - GHGD18 thru 60 1 R-410A Split-System Heat Pumps (13 SEER) 505437-USD-A-0309121 KB
Submittal Data Sheet - GHGD30* thru 60 3 R-410A Split-System Heat Pumps (13 SEER) 505441-USD-A-0309121 KB
 
Repair Parts
Repair Parts - GHGD 13 SEER Series Fin & Tube R-410A Split-System Heat Pump "Style A" 3rd Generation 035-22765-001-A-0809335 KB
Repair Parts - GHGD Series 1 R-410A Tube & Fin Split-System Heat Pumps (13 SEER) "Style A" 035-22265-001-C-0809334 KB
Repair Parts - GHGD Series 3 R-410A Fin & Tube Split-System Heat Pumps (13 SEER) "Style B" 035-22735-001-B-0809321 KB
Repair Parts - GHGD Series 3 R-410A Tube & Fin Split-System Heat Pumps (13 SEER) "Style A" 035-22267-001-B-0809332 KB
Repair Parts - GHGD Series Fin & Tube Split System Heat Pump, 4th Generation, "Style A" (13 SEER) 035-22803-001-B-0310447 KB
Repair Parts GHGD Series R-410A Fin & Tube Heat Pump, 2nd Generation, Style A (13 SEER) 035-22728-001-B-0809330 KB
Repair Parts GHGD Series R-410A Fin & Tube Heat Pump, 2nd Generation, Style A (13 SEER) 035-22728-001-B-0809320 KB
Repair Parts GHGD Series R-410A Fin & Tube Heat Pump, 3, 2nd Generation, Style A (13 SEER) 035-22738-001-A-0609320 KB
 
User Manuals
User Manual - 1 & 3 Outdoor Split-System Heat Pumps (13 & 14.5 SEER) 126874-UUM-J-070993 KB