Split System Heat Pumps
Products
 
 
Models
THGF

Capacities
1.5 to 5 Tons

Efficiency
14.5 SEER

Warranty
Compressor - 10-Year Limited*
Other parts - 10-Year Limited*

 
Latitude 1 R-410A Split-System Heat Pumps

The heat pump condensing unit is the outdoor part of a versatile system of heating and air conditioning. It is designed to be custom-matched with one of UPGs complete line of evaporator sections, with each serving a specific function. Matching Air Handlers are available for upflow, downflow, or horizontal applications to provide a complete system. Electric Heaters are available, if required. Add-on coils are available for use with upflow, downflow, or horizontal furnaces and air handlers. Many matches meet Federal Tax Rebate program.


Special Benefits
  • QUALITY CONDENSER COILS - The coil is constructed of copper tubing and enhanced aluminum fins for increased efficiency and corrosion protection.
  • PROTECTED COMPRESSOR - The complete scroll compressor line is internally protected against high pressure, temperature, and externally by a factory installed high pressure switch. This is accomplished by the simultaneous operation of high pressure relief valve and a temperature sensor which protects the compressor if undesirable operating conditions occur. A liquid line filter-drier further protects the compressor.
  • DURABLE FINISH - The cabinet is made of pre-painted steel. The pre-treated galvanized steel provides a better paint to steel bond, which resists corrosion and rust creep. Special primer formulas and matted-textured finish insure less fading when exposed to sunlight.
  • LOWER INSTALLED COST - Installation time and costs are reduced by easy power and control wiring connections. Available in sweat connect models only. The unit contains enough refrigerant for matching indoor coils and 15 feet of interconnecting piping. The small base dimension means less space is required on the ground or roof.
  • TOP DISCHARGE - The warm air from the top mounted fan is blown up away from the structure and any landscaping. This allows compact location on multi-unit applications.
  • LOW OPERATING SOUND LEVEL - The upward air flow carries the normal operating noise away from the living area. The rigid top panel effectively isolates any motor sound. Isolator mounted compressor and the rippled fins of the condenser coil muffle the normal fan motor and compressor operating sounds.
  • LOW MAINTENANCE - Long life permanently lubricated motor-bearings need no annual servicing.
  • EASY SERVICE ACCESS - Fully exposed refrigerant connections, and a single panel covering the electrical controls make for easy servicing of the unit.
  • SECURED SERVICE VALVES - Secured re-usable service valves are provided on both the liquid and vapor sweat connections for ease of evacuating and charging.
  • U.L. and C.U.L. listed - approved for outdoor application.
  • Agency Listed - U.L. and C.U.L. listed - approved for outdoor application. The unit is certified in accordance with the Unitary Small Equipment cerification program, which is based on ARI Standard 210/240.

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate. This warranty does not apply to R-22 or 3-phase models.


Publications and Manuals
DescriptionPart NumberFile Size
Consumer Brochures
Consumer Brochure - THGF 018-060 R-410A Latitude Series Heat Pumps (14.5 SEER) PUBL-6231-A-1009516 KB
 
Tech Guides
Technical Guide - THGF18-60, 1 R-410A Split System Heat Pump (14.5 SEER) 560593-YTG-A-0310399 KB
 
Tabular Data
Tabular Data Sheet - THGF18* thru 60 1 R-410A Outdoor Split-System Heat Pump (14.5 SEER) 539606-UTD-A-110995 KB
 
Installation Instructions
Installation Manual - THGD,F/GHGD/THJD,F/YHJR/THJR 1 & 3 Series Split System Heat Pumps (13 & 14.5 SEER) 550377-UIM-A-0410595 KB
 
Accessory Installation Instructions
Installation Accessory - 1HK0201 Hurricane Kit 035-21331-001-B-0709132 KB
Installation Accessory - 2FD06700224 Blower-Off Delay Kit 417779-UAI-B-120830 KB
Installation Accessory - 2SA067* Hard Start Kit 364024-UAI-B-0509978 KB
 
Submittal Drawings
Submittal Data Sheet - THGF18 thru 60 1 R-410A Split-System Heat Pumps (14.5 SEER) 510666-USD-A-0409132 KB
 
Repair Parts
Repair Parts - THGF Series Fin & Tube R-410A Split System Heat Pump "Style A" 3rd Generation (14.5 SEER) 035-22772-001-B-0110397 KB
Repair Parts - THGF Series Tube & Fin R-410A Split System Heat Pump "Style A", Generation 1 & 2 (14.5 SEER) 035-22251-001-G-0110398 KB
 
User Manuals
User Manual - 1 & 3 Outdoor Split-System Heat Pumps (13 & 14.5 SEER) 126874-UUM-J-070993 KB