Evaporator Coils
Products
 
 
Models
MC

Capacities
2 - 5 Tons

Efficiency


Warranty
Other parts - 10 Year Limited*

 
MC - Multi-Position Evaporator Coil

These MC cooling and heat pump coils are designed to be installed with York furnaces and to be matched with York cooling and heat pump outdoor units.  All coils utilize a TXV to provide our customers with the optimum performance and refrigerant control required for 13+ SEER  systems.  Coils can be ordered with a R22 or R410A TXV factory installed.


 


"Flex-coils" are also available without a factory installed metering device.  For added application flexibility a R22 or R410A TXV is installed, on "Flex-coils", in the field to meet your refrigerant choice. 


Multi-Position Coils - Designed for high-efficiency with the added flexibility that allows it to be installed in any position, upflow, downflow, horizontal right or left.  This coil can be easily applied to our furnace and modular air handler in any configuration.     


Special Benefits
  • Thermal Expansion Valve – Provides flexibility to convert any coil to R22 or R410A refrigerant.  A true bolt-on TXV, valve assembly and equalizer tube are bolt-on, no brazing required.  TXV and sensing bulb are mounted inside the cased coil cabinet.  (Must be field supplied for all “Flex-coils”)
  • Insulated Cabinet – All evaporator coil cabinets are thermally insulated with foil faced insulation to prevent sweating.
  • Internally Clean – All evaporator coils are factory leak-tested, dehydrated, sealed and shipped with a holding charge.  The suction and liquid lines are sealed with rubber plugs, no cutting of connection stubs to attach line set. 
  • Durable Finish Inside and Out ­– Coil casings are made of prepainted steel.    The pre-treated flat galvanized steel provides a better paint to steel bond, which resist corrosion and rust creep.  All internal metal parts are made of G90 pre-painted steel i.e. triangular plates, top plates, horizontal supports etc.  (Coil header plates are non-painted due to the brazing process during production.)
  • Optimum Heat Transfer - Using the latest in heat transfer technology, staggered rows of copper tubes are mechanically expanded into aluminum fins to provide optimum air to surface contact for ample moisture removal as well as high performance ratings. 

*Must be installed on or after May 1st, 2009, and registered online within 90 days of installation. Otherwise, the warranty reverts to the standard warranty as published in the product warranty certificate. This warranty does not apply to R-22 or 3-phase models.


Publications and Manuals
DescriptionPart NumberFile Size
Tech Guides
Technical Guide - FC/HC/HD/MC/MH/PC/UC Add-On Coils For Use With Split-System Cooling & Heat Pumps 526001-YTG-A-0809597 KB
 
Installation Instructions
Installation Manual - MC / FC / PC Partial Cased / Full-Cased Upflow / Counterflow Cooling / Heat Pump Coils 525923-UIM-A-08091336 KB
 
Accessory Installation Instructions
Installation Accessory - S1-TVM2**, 4**, 7**, & 9** Thermal Expansion Valve Kits 166806-UAI-H-0408243 KB
Submittal Data Sheet - MC Full-Cased Multi-Position Add-On Coils 522618-USD-A-080984 KB
 
Submittal Drawings
Submitta Data Sheet - MV / MC Single Piece Air Handler, Split System Coil 550571-YSD-A-1209152 KB
Submittal Data Sheet - MA/MC Split-System Coil Single Piece Non Variable Speed Air Handler 254951-YSD-F-1106251 KB
 
Repair Parts
Repair Parts - MC Series Multi-Position Coil w/Horizontal Pan "Style A" - R-410A TXV Models 035-22103-001-A-0708224 KB
Repair Parts - MC Series Multi-Position R-22 TXV & Flex Coil w/Horizontal Pan "Style A & B" 035-20827-001-H-1108226 KB
Repair Parts - MC Series Multi-Position R-22 TXV & Flex Coils w/Horizontal Pan "Style H" 035-22218-001-A-1208227 KB
Repair Parts - MC Series Multi-Position R-410A TXV Coils w/Horizontal Pan "Style H" 035-22221-001-D-0809227 KB
 
Warranty Information
Warranty - UPG 10 year Limited Warranty on Air Handlers and Evaporator Coils and Parts 157976-UWA-B-040929 KB