|
Click here for
Publications
|
|
Online
Updates |
| Nominal
Capacities |
| 18 to 60 Mbh |
| |
| Efficiency |
| 10 SEER/3.0+ COP/7.0
HSPF |
| |
| Warranty |
Compressor -
5 Years
Other Parts -
1Ph-5Yrs / 3Ph-1 Yr
| |
| Champion® Series
(BHA) |
York Champion® Series single-package
heat pumps are designed for outdoor installation that saves indoor
living space.
Nominal airflow of 600 to 2,000 CFM is provided by
3-speed, direct-drive, high-static motors. To make installation and
maintenance easier, they offer field convertible side or bottom
airflow, removable base rails, and bottom electrical
connections.
All models have the same footprint, so curbs can be
placed and then the proper tonnage unit can be installed after the
internal load has been determined. The compact dimensions allow any
model to fit between the wheel wells of a full- size pickup truck
for transport. Champion units are also offered in three-phase
configurations with 208/230, 460, and 575 voltages. Models
include:
• Champion (BHA) |
| |
Special
Benefits
|
- All model sizes share a common, compact design cabinet in a
single footprint for on-site flexibility.
- Installation time and costs are reduced by easy power and
control wiring. All units are factory wired, charged with R-22,
and tested prior to shipment.
- Electric utility knockouts are provided on unit side and
bottom for easy connections.
- Convertible airflow design means no panel cutting is required,
and no accessory panel is necessary.
- Condensate pan is non-corrosive, long-lasting, and watertight.
- Condensate drain is heavy-duty. A one-inch NPT1 copper
connection is rigidly mounted for proper fit and a tight seal.
- Durable finish, made of powder-painted, galvanized steel to
meet 750-hour salt-spray test demands.
- Full-perimeter base rails are easily removable, yet provide a
solid unit foundation.
- Top discharge allows warm air to be blown up away from the
structure and landscaping.
- Multi-pieces totally enclosed for maximum protection.
- Engineered and built to be among the quietest.
- Compressor is internally protected against high pressure and
temperature.
- Grooved copper tubes and enhanced aluminum fin construction
improve heat transfer.
- Permanently lubricated condenser and evaporator fan motor
bearings need no annual maintenance.
- Secured service access ports are protected, externally
mounted, and re-usable on both high and low lines.
- Easy service access via a large single panel covering the
electrical controls.
| |
